1. Confirm the room scope
Identify the fittings, finishes, retained services and handover condition for the bathroom.
Core service
Bathroom Strip-Out across Surrey & London
Removal of sanitaryware, cabinets, tiles and non-retained finishes ahead of bathroom refurbishment.
We plan the work around your site, access, waste removal and the finish needed for the next stage.
- Veteran-led
- Clear quotations
- Project-specific RAMS where required
- Waste routes planned
- Ready for the next stage
What this service includes
This service is suitable for homeowners, landlords, builders and bathroom installers. The scope is built around the project information, retained elements and the condition needed for the next stage.
Typical scope options
- Sanitaryware and cabinets
- Tiles and non-retained finishes
- Selected floor and wall preparation
- Clearance for refurbishment
What can be included
- Agreed removal sequence
- Protection of retained areas where agreed
- Waste arrangements in the written scope
Controlled bathroom removal before refurbishment
Bathroom strip-out prepares a bathroom for refurbishment by removing the agreed fittings and finishes in a controlled sequence. The scope can include baths, shower trays, screens, sanitaryware, vanity units, fitted furniture, accessories, wall tiles, floor finishes, plasterboard, boxing and non-structural linings where specified.
The work is planned around retained pipework, drainage, ventilation, heating and adjacent finishes. It is not a bathroom-refitting service: plumbing installation, electrical installation, drying, mould remediation and new bathroom works remain with the appropriate following trades unless separately arranged.
When bathroom strip-out is the right first step
- A bathroom needs clearing before a new layout, plumbing work or installation.
- Existing sanitaryware, tiles, boxing and selected linings need removing from an agreed room.
- An upper-floor bathroom needs a practical route for debris through an occupied house or flat.
- A contractor needs a defined stripped condition before plumbing, electrical or bathroom-installation work begins.
Isolation, retained services and upper-floor access
Before quotation, useful information includes photographs, room dimensions, the intended handover, known water damage, available survey information and the isolation status of plumbing and electrical services. Baths, showers, basins, toilets and connected appliances should not be disturbed until the relevant services are suitably managed by appropriate competent trades.
Pipework, drainage, ventilation and heating that are to remain are identified before removal. In occupied homes and flats, floors, stairs, corridors and common areas can be protected, while dust control and a debris route are planned around the actual access.
Tiles, sanitaryware and concealed conditions
Bathroom removal produces mixed waste including ceramic sanitaryware, tiles, plasterboard, timber, metal and floor finishes. The removal route and waste handling are planned before work starts, particularly where the bathroom is on an upper floor or access is restricted.
Tanking, membranes and concealed water damage may only become apparent once finishes are removed. The scope can be reviewed if conditions differ from the available information. Bathroom strip-out removes the agreed existing elements; it does not include drying, remediation, new plumbing, electrical work or bathroom refitting.
See this work in practice
Chertsey is shown because its verified record includes bathroom strip-out and exposed floor-joist work. No additional project card is used without a relevant recorded scope.
View All ProjectsA bathroom strip-out sequence
2. Check service status
Confirm plumbing and electrical isolation arrangements through the appropriate competent trades.
3. Protect access and retained fabric
Set out protection, dust controls and a route for debris through the property or common areas.
4. Remove fittings and finishes
Take out the agreed sanitaryware, furniture, tiles, boxing, linings and floor finishes in a controlled order.
5. Clear and hand over
Remove waste and leave the stated condition ready for plumbing, electrical or installation work.
A bathroom ready for the following trades
The handover may be a cleared bathroom, exposed wall and floor backgrounds, retained pipework or another stated condition for the next contractor. New bathroom installation, service alterations, drying, mould remediation, tanking and finishes are not included unless expressly specified.
Chertsey is the principal evidence because its verified record includes bathroom strip-out and exposed floor-joist work. No additional project is used without a recorded bathroom-removal scope.
Questions clients ask
What does bathroom strip-out include?
It can include agreed baths, shower trays, screens, sanitaryware, vanity units, tiles, floor finishes, boxing and non-structural linings.
Do plumbing and electrical services need to be isolated?
Yes. Suitable isolation must be confirmed through appropriate competent trades before connected fittings are removed.
Can you remove wall tiles and floor finishes?
Yes, when they are included in the agreed scope. Concealed backgrounds, membranes and water damage may require further review once exposed.
Can you work in an occupied flat?
Yes, subject to access, common-area protection, upper-floor debris routes, dust control and building requirements.
Do you provide bathroom refitting?
No. Bathroom strip-out prepares the room for the following plumbing, electrical and installation trades.
What condition is the bathroom left in?
The agreed handover may be a cleared room or exposed backgrounds ready for the following trades, with retained services identified.
Related services
Internal Strip-Out
Selective or complete removal of kitchens, bathrooms, finishes, partitions and redundant interiors.
ExploreKitchen Dismantling
Careful removal of kitchens, appliances and associated finishes ahead of refurbishment or structural work.
ExplorePre-Renovation Strip-Out
Defined removal work that prepares a home for major refurbishment while protecting agreed retention items.
ExploreCan bathroom strip-out be completed before a new installation?
Yes. The room can be stripped back to the agreed condition so the bathroom installer and following trades can begin their work.